chore: upgrade mailserver (#33)

Reviewed-on: #33
Co-authored-by: Davide Polonio <poloniodavide@gmail.com>
Co-committed-by: Davide Polonio <poloniodavide@gmail.com>

.gitignore

@@ -4,3 +4,5 @@ config/
 .idea/
 env-searxng
 .*.env
+nextcloud/db.env
+nextcloud/nextcloud.env

.yamllint.yaml

@@ -0,0 +1,5 @@
+extends: default
+
+rules:
+  line-length:
+    max: 120

git_server/docker-compose.yaml

@@ -3,7 +3,7 @@ version: '3.7'
 
 services:
   git-server:
-    image: gitea/gitea:1.19
+    image: gitea/gitea:1.20
     restart: always
     volumes:
       - gs_data:/data

headscale/config.yaml

@@ -0,0 +1,328 @@
+---
+# headscale will look for a configuration file named `config.yaml` (or `config.json`) in the following order:
+#
+# - `/etc/headscale`
+# - `~/.headscale`
+# - current working directory
+
+# The url clients will connect to.
+# Typically this will be a domain like:
+#
+# https://myheadscale.example.com:443
+#
+server_url: https://vpn.poldebra.me:443
+
+# Address to listen to / bind to on the server
+#
+# For production:
+# listen_addr: 0.0.0.0:8080
+listen_addr: 0.0.0.0:8080
+
+# Address to listen to /metrics, you may want
+# to keep this endpoint private to your internal
+# network
+#
+metrics_listen_addr: 0.0.0.0:9090
+
+# Address to listen for gRPC.
+# gRPC is used for controlling a headscale server
+# remotely with the CLI
+# Note: Remote access _only_ works if you have
+# valid certificates.
+#
+# For production:
+# grpc_listen_addr: 0.0.0.0:50443
+grpc_listen_addr: 127.0.0.1:50443
+
+# Allow the gRPC admin interface to run in INSECURE
+# mode. This is not recommended as the traffic will
+# be unencrypted. Only enable if you know what you
+# are doing.
+grpc_allow_insecure: false
+
+# Private key used to encrypt the traffic between headscale
+# and Tailscale clients.
+# The private key file will be autogenerated if it's missing.
+#
+private_key_path: /var/lib/headscale/private.key
+
+# The Noise section includes specific configuration for the
+# TS2021 Noise protocol
+noise:
+  # The Noise private key is used to encrypt the
+  # traffic between headscale and Tailscale clients when
+  # using the new Noise-based protocol. It must be different
+  # from the legacy private key.
+  private_key_path: /var/lib/headscale/noise_private.key
+
+# List of IP prefixes to allocate tailaddresses from.
+# Each prefix consists of either an IPv4 or IPv6 address,
+# and the associated prefix length, delimited by a slash.
+# It must be within IP ranges supported by the Tailscale
+# client - i.e., subnets of 100.64.0.0/10 and fd7a:115c:a1e0::/48.
+# Any other range is NOT supported, and it will cause unexpected issues.
+ip_prefixes:
+  - fd7a:115c:a1e0::/48
+  - 100.64.0.0/10
+
+# DERP is a relay system that Tailscale uses when a direct
+# connection cannot be established.
+# https://tailscale.com/blog/how-tailscale-works/#encrypted-tcp-relays-derp
+#
+# headscale needs a list of DERP servers that can be presented
+# to the clients.
+derp:
+  server:
+    # If enabled, runs the embedded DERP server and merges it into the rest of the DERP config
+    # The Headscale server_url defined above MUST be using https, DERP requires TLS to be in place
+    enabled: false
+
+    # Region ID to use for the embedded DERP server.
+    # The local DERP prevails if the region ID collides with other region ID coming from
+    # the regular DERP config.
+    region_id: 999
+
+    # Region code and name are displayed in the Tailscale UI to identify a DERP region
+    region_code: "headscale"
+    region_name: "Headscale Embedded DERP"
+
+    # Listens over UDP at the configured address for STUN connections - to help with NAT traversal.
+    # When the embedded DERP server is enabled stun_listen_addr MUST be defined.
+    #
+    # For more details on how this works, check this great article: https://tailscale.com/blog/how-tailscale-works/
+    stun_listen_addr: "0.0.0.0:3478"
+
+  # List of externally available DERP maps encoded in JSON
+  urls:
+    - https://controlplane.tailscale.com/derpmap/default
+
+  # Locally available DERP map files encoded in YAML
+  #
+  # This option is mostly interesting for people hosting
+  # their own DERP servers:
+  # https://tailscale.com/kb/1118/custom-derp-servers/
+  #
+  # paths:
+  #   - /etc/headscale/derp-example.yaml
+  paths: []
+
+  # If enabled, a worker will be set up to periodically
+  # refresh the given sources and update the derpmap
+  # will be set up.
+  auto_update_enabled: true
+
+  # How often should we check for DERP updates?
+  update_frequency: 24h
+
+# Disables the automatic check for headscale updates on startup
+disable_check_updates: false
+
+# Time before an inactive ephemeral node is deleted?
+ephemeral_node_inactivity_timeout: 30m
+
+# Period to check for node updates within the tailnet. A value too low will severely affect
+# CPU consumption of Headscale. A value too high (over 60s) will cause problems
+# for the nodes, as they won't get updates or keep alive messages frequently enough.
+# In case of doubts, do not touch the default 10s.
+node_update_check_interval: 10s
+
+# SQLite config
+db_type: sqlite3
+
+# For production:
+db_path: /var/lib/headscale/db.sqlite
+
+# # Postgres config
+# If using a Unix socket to connect to Postgres, set the socket path in the 'host' field and leave 'port' blank.
+# db_type: postgres
+# db_host: localhost
+# db_port: 5432
+# db_name: headscale
+# db_user: foo
+# db_pass: bar
+
+# If other 'sslmode' is required instead of 'require(true)' and 'disabled(false)', set the 'sslmode' you need
+# in the 'db_ssl' field. Refers to https://www.postgresql.org/docs/current/libpq-ssl.html Table 34.1.
+# db_ssl: false
+
+### TLS configuration
+#
+## Let's encrypt / ACME
+#
+# headscale supports automatically requesting and setting up
+# TLS for a domain with Let's Encrypt.
+#
+# URL to ACME directory
+acme_url: https://acme-v02.api.letsencrypt.org/directory
+
+# Email to register with ACME provider
+acme_email: ""
+
+# Domain name to request a TLS certificate for:
+tls_letsencrypt_hostname: ""
+
+# Path to store certificates and metadata needed by
+# letsencrypt
+# For production:
+tls_letsencrypt_cache_dir: /var/lib/headscale/cache
+
+# Type of ACME challenge to use, currently supported types:
+# HTTP-01 or TLS-ALPN-01
+# See [docs/tls.md](docs/tls.md) for more information
+tls_letsencrypt_challenge_type: HTTP-01
+# When HTTP-01 challenge is chosen, letsencrypt must set up a
+# verification endpoint, and it will be listening on:
+# :http = port 80
+tls_letsencrypt_listen: ":http"
+
+## Use already defined certificates:
+tls_cert_path: ""
+tls_key_path: ""
+
+log:
+  # Output formatting for logs: text or json
+  format: text
+  level: info
+
+# Path to a file containg ACL policies.
+# ACLs can be defined as YAML or HUJSON.
+# https://tailscale.com/kb/1018/acls/
+acl_policy_path: ""
+
+## DNS
+#
+# headscale supports Tailscale's DNS configuration and MagicDNS.
+# Please have a look to their KB to better understand the concepts:
+#
+# - https://tailscale.com/kb/1054/dns/
+# - https://tailscale.com/kb/1081/magicdns/
+# - https://tailscale.com/blog/2021-09-private-dns-with-magicdns/
+#
+dns_config:
+  # Whether to prefer using Headscale provided DNS or use local.
+  override_local_dns: true
+
+  # List of DNS servers to expose to clients.
+  nameservers:
+    - 100.64.0.4
+    # - 1.0.0.1
+
+  # NextDNS (see https://tailscale.com/kb/1218/nextdns/).
+  # "abc123" is example NextDNS ID, replace with yours.
+  #
+  # With metadata sharing:
+  # nameservers:
+  #   - https://dns.nextdns.io/abc123
+  #
+  # Without metadata sharing:
+  # nameservers:
+  #   - 2a07:a8c0::ab:c123
+  #   - 2a07:a8c1::ab:c123
+
+  # Split DNS (see https://tailscale.com/kb/1054/dns/),
+  # list of search domains and the DNS to query for each one.
+  #
+  # restricted_nameservers:
+  #   foo.bar.com:
+  #     - 1.1.1.1
+  #   darp.headscale.net:
+  #     - 1.1.1.1
+  #     - 8.8.8.8
+
+  # Search domains to inject.
+  domains: []
+
+  # Extra DNS records
+  # so far only A-records are supported (on the tailscale side)
+  # See https://github.com/juanfont/headscale/blob/main/docs/dns-records.md#Limitations
+  # extra_records:
+  #   - name: "grafana.myvpn.example.com"
+  #     type: "A"
+  #     value: "100.64.0.3"
+  #
+  #   # you can also put it in one line
+  #   - { name: "prometheus.myvpn.example.com", type: "A", value: "100.64.0.3" }
+  extra_records:
+    - name: "pi.hole"
+      type: "A"
+      value: "100.64.0.4"
+
+  # Whether to use [MagicDNS](https://tailscale.com/kb/1081/magicdns/).
+  # Only works if there is at least a nameserver defined.
+  magic_dns: true
+
+  # Defines the base domain to create the hostnames for MagicDNS.
+  # `base_domain` must be a FQDNs, without the trailing dot.
+  # The FQDN of the hosts will be
+  # `hostname.user.base_domain` (e.g., _myhost.myuser.example.com_).
+  base_domain: vpn.poldebra.me
+
+# Unix socket used for the CLI to connect without authentication
+# Note: for production you will want to set this to something like:
+unix_socket: /var/run/headscale/headscale.sock
+unix_socket_permission: "0770"
+#
+# headscale supports experimental OpenID connect support,
+# it is still being tested and might have some bugs, please
+# help us test it.
+# OpenID Connect
+# oidc:
+#   only_start_if_oidc_is_available: true
+#   issuer: "https://your-oidc.issuer.com/path"
+#   client_id: "your-oidc-client-id"
+#   client_secret: "your-oidc-client-secret"
+#   # Alternatively, set `client_secret_path` to read the secret from the file.
+#   # It resolves environment variables, making integration to systemd's
+#   # `LoadCredential` straightforward:
+#   client_secret_path: "${CREDENTIALS_DIRECTORY}/oidc_client_secret"
+#   # client_secret and client_secret_path are mutually exclusive.
+#
+#   # The amount of time from a node is authenticated with OpenID until it
+#   # expires and needs to reauthenticate.
+#   # Setting the value to "0" will mean no expiry.
+#   expiry: 180d
+#
+#   # Use the expiry from the token received from OpenID when the user logged
+#   # in, this will typically lead to frequent need to reauthenticate and should
+#   # only been enabled if you know what you are doing.
+#   # Note: enabling this will cause `oidc.expiry` to be ignored.
+#   use_expiry_from_token: false
+#
+#   # Customize the scopes used in the OIDC flow, defaults to "openid", "profile" and "email" and add custom query
+#   # parameters to the Authorize Endpoint request. Scopes default to "openid", "profile" and "email".
+#
+#   scope: ["openid", "profile", "email", "custom"]
+#   extra_params:
+#     domain_hint: example.com
+#
+#   # List allowed principal domains and/or users. If an authenticated user's domain is not in this list, the
+#   # authentication request will be rejected.
+#
+#   allowed_domains:
+#     - example.com
+#   # Note: Groups from keycloak have a leading '/'
+#   allowed_groups:
+#     - /headscale
+#   allowed_users:
+#     - alice@example.com
+#
+#   # If `strip_email_domain` is set to `true`, the domain part of the username email address will be removed.
+#   # This will transform `first-name.last-name@example.com` to the user `first-name.last-name`
+#   # If `strip_email_domain` is set to `false` the domain part will NOT be removed resulting to the following
+#   user: `first-name.last-name.example.com`
+#
+#   strip_email_domain: true
+
+# Logtail configuration
+# Logtail is Tailscales logging and auditing infrastructure, it allows the control panel
+# to instruct tailscale nodes to log their activity to a remote server.
+logtail:
+  # Enable logtail for this headscales clients.
+  # As there is currently no support for overriding the log server in headscale, this is
+  # disabled by default. Enabling this will make your clients send logs to Tailscale Inc.
+  enabled: false
+
+# Enabling this option makes devices prefer a random port for WireGuard traffic over the
+# default static port 41641. This option is intended as a workaround for some buggy
+# firewall devices. See https://tailscale.com/kb/1181/firewalls/ for more information.
+randomize_client_port: false

headscale/docker-compose.yml

@@ -0,0 +1,22 @@
+services:
+  headscale:
+    image: headscale/headscale:0.22.3
+    restart: unless-stopped
+    container_name: headscale
+    volumes:
+      - /srv/docker/headscale/data:/var/lib/headscale
+      - /srv/docker/headscale/config:/etc/headscale
+    command: headscale serve
+    networks:
+      - proxy
+    env_file:
+      - env-vpn
+    logging:
+      driver: "json-file"
+      options:
+        max-size: "10m"
+        max-file: "3"
+
+networks:
+  proxy:
+    external: true

mail/docker-compose.yml

@@ -1,8 +1,6 @@
----
-version: '3.9'
 services:
   mail:
-    image: mailserver/docker-mailserver:12.1.0
+    image: mailserver/docker-mailserver:14.0.0
     hostname: ${HOSTNAME}
     domainname: ${DOMAINNAME}
     container_name: ${CONTAINER_NAME}

mail/setup.sh

@@ -27,8 +27,7 @@ RESET=$(echo -ne '\e[0m')
 set -euEo pipefail
 shopt -s inherit_errexit 2>/dev/null || true
 
-function _show_local_usage
+function _show_local_usage() {
-{
   # shellcheck disable=SC2059
   printf '%s' "${ORANGE}OPTIONS${RESET}
     ${LBLUE}Config path, container or image adjustments${RESET}
@@ -69,8 +68,7 @@ function _show_local_usage
 "
 }
 
-function _get_absolute_script_directory
+function _get_absolute_script_directory() {
-{
   if dirname "$(readlink -f "${0}")" &>/dev/null; then
     DIR=$(dirname "$(readlink -f "${0}")")
   elif realpath -e -L "${0}" &>/dev/null; then
@@ -79,8 +77,7 @@ function _get_absolute_script_directory
   fi
 }
 
-function _set_default_config_path
+function _set_default_config_path() {
-{
   if [[ -d "${DIR}/config" ]]; then
     # legacy path (pre v10.2.0)
     DEFAULT_CONFIG_PATH="${DIR}/config"
@@ -89,8 +86,7 @@ function _set_default_config_path
   fi
 }
 
-function _handle_config_path
+function _handle_config_path() {
-{
   if [[ -z ${DESIRED_CONFIG_PATH} ]]; then
     # no desired config path
     if [[ -n ${CONTAINER_NAME} ]]; then
@@ -111,8 +107,7 @@ function _handle_config_path
   fi
 }
 
-function _run_in_new_container
+function _run_in_new_container() {
-{
   # start temporary container with specified image
   if ! ${CRI} history -q "${IMAGE_NAME}" &>/dev/null; then
     echo "Image '${IMAGE_NAME}' not found. Pulling ..."
@@ -124,14 +119,12 @@ function _run_in_new_container
     "${IMAGE_NAME}" "${@}"
 }
 
-function _main
+function _main() {
-{
   _get_absolute_script_directory
   _set_default_config_path
 
   local OPTIND
-  while getopts ":c:i:p:zZR" OPT
+  while getopts ":c:i:p:zZR" OPT; do
-  do
     case ${OPT} in
       ( i )     IMAGE_NAME="${OPTARG}"     ;;
       ( z | Z ) USE_SELINUX=":${OPT}"      ;;

nextcloud/docker-compose.yml

@@ -0,0 +1,85 @@
+version: '3.9'
+
+services:
+  db:
+    image: postgres:15-alpine
+    restart: unless-stopped
+    volumes:
+      - db:/var/lib/postgresql/data:Z
+    env_file:
+      - db.env
+    logging:
+      driver: "json-file"
+      options:
+        max-size: "10m"
+        max-file: "3"
+
+  redis:
+    image: redis:7-alpine
+    restart: unless-stopped
+    logging:
+      driver: "json-file"
+      options:
+        max-size: "5m"
+        max-file: "1"
+
+  app:
+    image: nextcloud:production-apache
+    restart: unless-stopped
+    volumes:
+      - app:/var/www/html:z
+      - data:/data:z
+    env_file:
+      - db.env
+      - nextcloud.env
+    depends_on:
+      - db
+      - redis
+    networks:
+      - proxy
+      - default
+    logging:
+      driver: "json-file"
+      options:
+        max-size: "10m"
+        max-file: "3"
+
+  cron:
+    image: nextcloud:production-apache
+    restart: unless-stopped
+    volumes:
+      - app:/var/www/html:z
+      - data:/data:z
+    entrypoint: /cron.sh
+    depends_on:
+      - db
+      - redis
+    logging:
+      driver: "json-file"
+      options:
+        max-size: "10m"
+        max-file: "3"
+
+volumes:
+  db:
+    driver: local
+    driver_opts:
+      type: none
+      o: bind
+      device: "/srv/docker/nextcloud/db"
+  app:
+    driver: local
+    driver_opts:
+      type: none
+      o: bind
+      device: "/srv/docker/nextcloud/app"
+  data:
+    driver: local
+    driver_opts:
+      type: none
+      o: bind
+      device: "/srv/mnt/nextcloud/data"
+
+networks:
+  proxy:
+    external: true

reverse_proxy/client_max_body_size.conf

@@ -1 +1,3 @@
 client_max_body_size 15g;
+proxy_request_buffering off;
+

rss/docker-compose.yml

@@ -0,0 +1,80 @@
+version: '3.9'
+services:
+  rss:
+    image: miniflux/miniflux:latest
+    restart: unless-stopped
+    healthcheck:
+      test: ["CMD", "/usr/bin/miniflux", "-healthcheck", "auto"]
+    depends_on:
+      db:
+        condition: service_healthy
+      morss:
+        condition: service_healthy
+    environment:
+      - RUN_MIGRATIONS=1
+    env_file:
+      - .env
+    networks:
+      - internal
+      - proxy
+    logging:
+      driver: "json-file"
+      options:
+        max-size: "1m"
+        max-file: "1"
+  db:
+    image: postgres:15-alpine
+    restart: unless-stopped
+    volumes:
+      - db:/var/lib/postgresql/data
+    env_file:
+      - .env
+    healthcheck:
+      test: ["CMD", "pg_isready", "-U", "rss"]
+      interval: 10s
+      start_period: 30s
+    networks:
+      - internal
+    logging:
+      driver: "json-file"
+      options:
+        max-size: "1m"
+        max-file: "1"
+  morss:
+    image: pictuga/morss:latest
+    restart: unless-stopped
+    environment:
+      - MAX_TIME=10
+      - MAX_ITEM=-1
+      - LIM_TIME=120
+      - LIM_ITEM=-1
+      - CACHE=diskcache
+      - CACHE_SIZE=2048000000
+    healthcheck:
+      test: ["CMD", "/usr/bin/wget", "--no-verbose", "--tries=1", "--spider", "http://localhost:8000"]
+      interval: 1m30s
+      timeout: 10s
+      retries: 3
+      start_period: 30s
+    networks:
+      - internal
+    logging:
+      driver: "json-file"
+      options:
+        max-size: "1m"
+        max-file: "1"
+
+volumes:
+  db:
+    driver: local
+    driver_opts:
+      type: none
+      o: bind
+      device: "/srv/docker/rss/db"
+
+networks:
+  internal:
+    ipam:
+      driver: default
+  proxy:
+    external: true

searxng/docker-compose.yml

@@ -19,7 +19,7 @@ services:
 
   searxng:
     container_name: searxng
-    image: searxng/searxng:2023.3.24-64fea2f9
+    image: searxng/searxng:2024.5.31-18fb701be
     restart: unless-stopped
     networks:
       - searxng

songlify/docker-compose.yml

@@ -2,7 +2,7 @@ version: '3.7'
 
 services:
   bot:
-    image: polpetta/songlify:0.3.4
+    image: polpetta/songlify:0.3.5
     restart: always
     entrypoint: /usr/bin/songlify
     env_file: